The Freedom of Infinity

Suspension. Clipless pedals. Gore Tex. Once in a while you buy something that turns out to revolutionise your cycling. We all have a small list of items, each of which – whether it helps you go faster, go further, stay more comfortable, or ride when and where you previously couldn’t – marks an epiphany in some way.

And when it comes to road riding or commuting, dyno lighting is at the top of my list.

The B&M Luxos: the all-singing, all-dancing option.
The B&M Luxos U: the all-singing, all-dancing option.

Part one, in which I know why you think you don’t want dyno lighting

I didn’t, either. I liked battery lights. They were compact; they could be moved between bikes; they chucked out loads of light; they didn’t weigh much or cause any drag… what’s not to like?

Surely a dyno setup, on the other hand…

…is expensive? Depends what you’re comparing it to. A setup suited to fast rural riding at night will set you back about £150 or so, including a new wheel (examples below). That compares similarly or even favourably to most premium battery lights: the Exposure Strada, intended for similar use, is around £250. You can go cheaper, of course. A good bottle dynamo and front and rear commuter lights would set you back about £50.

…is heavy? Needn’t be the case. An SP dynohub and an B&M Cyo light is about 150g heavier than a Shimano 105 hub and Exposure Strada light (for less cost). Yes, it’s a bit more, but it’s not much (and if you were to add a piggyback battery to increase runtime, that difference would reduce or even reverse).

…is draggy? Well, naturally, nothing comes for free. You’ll lose a couple of watts of power with the lights off and half a dozen or so when they’re on (there are some charts in the CTC’s dyno feature). But I’ve never been able to discern any effect. Sure, don’t go time trialling with a dyno. But unless you’re bothered by the second hand on your watch, you won’t notice.

…stops when you stop? Nearly all dyno lights have standlights, which keep the light on for five or six minutes (the front light usually dims when on the standlight, but is still plenty visible). So no need to worry about being stopped at even the slowest of traffic lights.

…isn’t very bright? LEDs and dynamos are a match made in heaven, and it’s a match that’s getting better all the time as LEDs improve. Dyno lights do generally chuck out less light than the brightest battery lights, but here’s the thing: because they nearly all adhere to the German StVZO lighting regulations, they put that light only where it’s needed. Instead of simply vomiting photons in a cone shape, they use carefully shaped reflectors to place them on the road ahead. They send more light into the distance than the nearfield, too, to give more balanced illumination once the light reaches your eye. They are in essence miniature car headlamps, whilst battery lights are generally little more than very expensive torches. Putting aside the complexities of comparing beams, the bottom line is that £40 will get you a dyno light that’s plenty good enough to ride pretty much as fast as you like in the dead of night.

…can be easily stolen? The lights are bolted to the bike, so if you have to lock your bike up outside, the lights stay with it. A fair concern, but with commuter lights topping out at around £40 for both front and rear, and the black market for such lights being tiny, it seems an unlikely worry. A cable cutter and an allen key will let a thief take your bars and shifters in less time, and possibly your saddle and seatpost, too. Much easier to take, and to sell on, than some dyno lights.

…can’t easily be moved between bikes? Well, ok, that’s a fair cop, and one of the main reasons I was reluctant to move to a dyno. But if you’ve got the money for multiple bikes, the additional spend on the next dyno setup is just as rewarding as the first; I’ve ended up converting three bikes.

The dipped beam of an StVZO-compliant light is still perfectly good for being seen by. Here, the middle bike has a B&M Cyo; the others Exposure lights. (Photo by Philip Diprose.)
The dipped beam of an StVZO-compliant light is still perfectly good for being seen by. Here, the middle bike has a B&M Cyo; the others Exposure lights. (Photo by Philip Diprose.)

Part two, in which I evangelise about dyno lighting

OK, so hopefully there are fewer if any downsides to dyno lighting than you might think, but what’s great about it?

Well, dyno lighting…

…never runs out. Keep riding. Ride as long as you want. You’ve got light. Dawn turns out to be overcast? Keep ’em on. Sudden downpour? Keep ’em on. Patch of mist in a valley? Keep ’em on. You’re never caught short and you never need to be economical.

…never needs charging. Ever wanted to do a ride and realised your lights aren’t charged? Forget it. Pick your bike up and go.

…doesn’t dazzle drivers. Nearly all dyno lights conform to StVZO regulations, meaning they have a proper dipped beam like a car headlight (don’t worry: as shown above, they’re still highly visible to other road users). One of my main reasons for turning to dynos was to get away from being main-beamed by drivers on rural roads; something which became more than just an irritation for me, it was a real safety issue. I don’t get main-beamed anymore.

…is always there. You know when you’re in a car and you’re sitting in traffic, and you see an eye-catching twinkle in your mirror? Maybe it’s a cyclist with lights filtering, who you’ve now been alerted to. I ride past half a mile of stationary traffic every evening, and I’m confident that people notice me in mirrors better with a light than without. Also, ever driven in and out of tree coverage on a bright day and noticed the sun on the windscreen severely affecting visibility? I’ll take whatever insurance I can against that, which is mainly a bright, always-on rear light. There are occasions when bright clothes are camouflage and there are occasions when reflective gear is of no use, but – barring you being perfectly eclipsed by the sun – lights work everywhere fabrics work plus everywhere they don’t. What’s more, my experience is that I seem to get fewer close passes, and far fewer people pulling out of side roads in front of me, when I’ve got lights on in any weather. Enough so that I just don’t like ever being without lights now.

…isn’t just for lighting! Once you’ve got a dyno, you can charge other kit. Some lights, like the B&M Luxos U have integrated USB output; or you can buy a separate device like Tout Terrain’s Plug or the B&M e-Werk, to feed your dyno output to all manner of electronic kit.

…frees you. You don’t need to remember your lights; they’re on the bike. You don’t need to remember to charge them. You don’t need to worry about switching modes to save power. You don’t need to think about what’s the right level of ambient light to have them on or off. You don’t have to think “I wish I had my lights” when you get caught in a downpour. You just ride a bike. Cycling is freedom, and the less faff there is the freer you are.

In short, you get all the benefits of having lights, all of the time, with none of the downsides and with none of the extra activity that goes into keeping them running.

Dynos aren't just about light. The B&M Luxos U allows you to charge devices via USB as you ride. Perfect for tours or really long rides.
Dynos aren’t just about light. The B&M Luxos U allows you to charge devices via USB as you ride. Perfect for tours or really long rides.

Part three, in which I suggest some kit

These are just some ideas to get you started. I’ve habitually stuck to Shimano hubs and Busch & Müller lights as they’re the sweet spots on the bang/buck curves, but shop around. I’d recommend browsing round Peter White’s website for beam shots and all sorts of information on various lights. Note that most of these options are based on hub dynos, in which case you’d also need a rim (£20+) and spokes (£10+). The links are to Rose Bikes because – sorry, UK retailers – dyno kit is generally a lot cheaper in Germany, and Rose have good customer service.

The budget option (£44, no new wheel needed): Axa HR Traction bottle dynamo (£13), Axa Sprint front lamp (£16), B&M Secula Plus rear lamp (£13).

The commuter setup (£59): Shimano 3N31 hub (£25), B&M Lyt Senso Plus front lamp (£21), B&M Secula Plus rear lamp (£13).

The audax setup (£107): Shimano 3N80 hub (£50), B&M Cyo Premium T Senso Plus front lamp (£44), B&M Secula Plus rear lamp (£13).

The epic setup (£169): Shimano XT Disc hub (£59), B&M Luxos U front lamp (£97), B&M Secula Plus rear lamp (£13).

The off-road setup (£260+): Exposure Revo pack (£252) plus any old battery rear light.

So, assuming a wheelbuild of about £40 or so, that gives you a bunch of options from £50 to £200 in £50 steps, plus the unique Revo. Plenty of choice.

The B&M Lyt. A large frontal area, side illumination and an integrated reflector make this a great commuter light.
The B&M Lyt. A large frontal area, side illumination and an integrated reflector make this a great commuter light.

Part four, in which I apologise

No-one likes an evangelist. And dynamo users tend to be evangelists. But, really, there is a good reason. The joy of simply getting lighting nailed in one go, and never having to worry about it again, is quite something. The freedom of always having light is liberating, no matter whether you ride frequently or far, or both – or even if you’re just forgetful when it comes to charging.

To infinity – and beyond!